MF Digital SCRIBE 9000 - Manual (Page 18)

Page 17
Application Temp Folder
• To choose an application temp folder, click the Browse button to the
right of the Application TEMP folder field. This folder is a temporary
location for your CD image to reside before and during duplication.
After job completion, the image is removed.
Note: You should have 10GB of free space on your hard drive specifically for
this folder. The folder should always reside on a drive formatted
NTFS and never FAT32 or FAT16.
CD / DVD Images Default Folder
• To choose a default folder for your CD and DVD images, click the
Browse button to the right. When creating a new job, this will be the
default folder that the Scribe opens to browse for an image file path.
CD Labels Default Folder
• To choose a default folder for your CD labels, click the Browse button
to the right of the CD labels default folder field. When creating a new
job, this will be the default folder that the Scribe opens to browse for a
label file path.
Printer Driver
The PRINTER DRIVER pull-down is used to indicate to the Scribe the
type of printer that is installed.
• Click the PRINTER DRIVER pull down and select the type of printer
being used.
Spindle Select
When enabled, SPINDLE SELECT allows you to assign one input spindle
for DVD-R and one for CD-R. This is useful when submitting multiple jobs
or when the Scribe is being shared amongst network users. When a job
requiring CD blanks is started, the Scribe will know from which spindle to
draw blank CD-R media. Likewise, when a job requiring DVD blanks is
submitted, the Scribe will know to which spindle contains DVD-R/+R
media. Be sure to fill input spindles only half full, as the first input cannot
double as both an input and output spindle an output spindle