MF Digital SCRIBE 9000 - Manual (Page 57)

Page 56
Appendix B: Creating .PRN Files (Prism Plus)
Printer Driver setup
Before you create your first print label,
you must first set a couple of printer
defaults. Once you have done this, you
need not repeat this step again unless you
reinstall the printer driver.
•
Double-click MY COMPUTER on the
desktop, then click on CONROL
PANEL. From the control panel, click
on PRINTERS AND FAXES. Right-
click on RIMAGE PERFECT IMAGE
PRINTER PF and select properties.
Click on the ADVANCED TAB, and set
the PRINT DIRECTLY TO PRINTER
option as seen in Fig A.
•
Your printer shipped with a
monochrome back ribbon. You need to
tell the printer that this ribbon is
installed. As depicted in Fig B., click on
the DEVICE SETTINGS tab, and click
on the INSTALLED RIBBON pull
down and select “Monocolor”.
•
Click OK
(Fig A.)
(Fig B.)