MF Digital SCRIBE 9000 - Manual (Page 19)

Page 18
• Check the box to enable “Spindle Select” mode.
Note: Capacity is halved in this mode. Fill input spindles only half full. Since
the first input spindle cannot double for output as it would when
“Spindle Select” mode is disabled. The output will overflow if you fail
to do so.
Shake Disc
When enabled, SHAKE DISC will perform a slight shaking motion with
each pick of disc from an input hopper. If the discs are somewhat sticky,
this can help in separating them. Only enable this in the event you have
sticky media.
• Check the box to enable “SHAKE DISC”
Note: When loading blank CDs or DVDs, it is a good idea to fan out the discs.
If discs are excessively sticky, it is best to source a different brand or
part number. Media made with proper lacquer curing times will
minimize this effect.