MF Digital SCRIBE EC PC-Based Series - Manual (Page 15)

SCRIBE EC Operator’s Guide
Document Revision: 11/4/04
Page 14
Mounting the Firewire Adapter Card
One and two drive ScribeECs require
one IEEE-1394 card. Four drive systems
require two IEEE-1394 cards.
1. Shut down the PC.
2. Turn the PC’s power off.
3. Unplug the PC.
4. Remove the PC’s cover as
indicated in the PC’s manual.
5. Locate an empty PCI slot, as seen
in (fig.1).
6. Install the firewire adapter card
(fig. 2).
(fig. 1)
(fig. 2)
You should never attempt to service a unit without ensuring proper anti-
static protection. The use of a grounding strap, or other such grounding
device, is advised. In addition, the internal configuration of your
computer may be different from the computer pictured below.
Note: