MF Digital SCRIBE EC PC-Based Series - Manual (Page 25)

SCRIBE EC Operator’s Guide
Document Revision: 11/4/04
Page 24
Starting The SCRIBE EC For The First Time
Before CD creation can begin it is necessary to review a few details.
Power Connection And Settings
• Make sure the SCRIBE EC power switch is set to the off position.
• Plug one end of the supplied power cord into the receptacle at the rear
of the unit, and the other end into the wall or UPS power outlet.
0
CAUTION
Always use properly grounded receptacles, or severe damage
to your system may result. The use of a surge protector or
Uninterruptible Power Supply (UPS) is highly recommended.
Starting Up
• Flip the SCRIBE EC power switch to the on position.
• Switch on the power to the printer.
• Turn on the computer and get to the desktop.
Note: The SCRIBE EC uses Microsoft’s Windows 2000, and XP
operating systems. To get the most out of the SCRIBE EC it is
recommended that users supplement this manual with an
operating system guide.