Microtel Series 1000 - Manual (Page 40)

MICROTEL Series 1000 Dialer
34
Low Setpoints The value at which a low alarm occurs for this analog input (0%
disables this channel's low alarm).
*c91
Review I/O c analog input low setpoint
**c91aaa Program I/O c analog input low setpoint
Example- Command:
**191123
Response: Channel one analog input low setpoint is one two point
three percent.
NOTE: All analog inputs or outputs are expressed as a percentage of full scale with a
range of 0% (zero) to 99.9%. A simple conversion from percentage to actual
engineering values is made with a direct proportion. A conversion chart is
provided in the Appendix to convert to and from commonly used engineering
values. To use these charts, locate the percentage or engineering unit and read
the corresponding conversion.