Microtel Series 1000 - Manual (Page 55)

MICROTEL Series 1000 Dialer
49
The on-call person is going out of town for 3 days. He wishes his family not to be
disturbed while he is gone. The dialer is instructed to skip his phone number during
an alarm call-out sequence. In this case, the command **021030405 would prohibit
alarm calls to be placed to phone 1 for 3 days, 4 hours, and 5 minutes beginning at the
time the command is sent.
z Initializing Configuration Data These programming commands configure the
dialer with default data. Before initializing, print or FAX a copy of your dialer’s
current configuration as described in Chapter 3, Operations section.
**009001973
Initialize System Data
**009102846 Initialize Telephone Data
**009200534 Initialize Channel Data
CAUTION: Programmed data will be reset to Defaults. These commands should
only be used if it is necessary to clear out all configuration data.