Moog Crossbow GNAV540 - Manual (Page 50)

Page 50
GNAV540 User Manual
7430‐0808‐01 Rev. B
1. Locate the icon at the top of the page, or
click File and then select Log to File from the
Figure 11 Log to File Menu
drop down menu. The dialog window opens.
e 2. Click th Browse
ing data.
button and select the location
for sav
3. In the Log Type section, select the type of data
to record:
Engineering Data records the converted values
provided from the system in engineering units
(default selection).
Hex Data pro
separated into
vides the raw hex values
columns displaying the value.
Raw Packets records the hex strings as they are
sent from the unit.
4. In the Lo ion, the following options are available: gging Rate sect
• e Fractional Rat
Sample Rates
•
he 5. In the Test Duration section, define t desired duration of the data logging in terms of Days,
Hours, Minutes, and/or Seconds. The default setting is 10 seconds.
6. win After setting all the options, click the OK button. The display will return to the main dow.
To start the recording process, press the button at the top of the window, click File and then
to select Start Logging from the drop menu. Refer Figure 8 on page 48.
he To stop the recording the data early, press t button. Afterwards, when you select Start
b ed. Logging, the new information will e append
To pause the recording, press the button.
Playback Data
In additi in a log file. on to data recording, NAV‐VIEW 2.2 allows the user to replay saved data that has been stored
1. To playback data, select “Playback Mode” from the “Data Source” drop down menu at the top.
Selecting Playback mode will open a text prompt which will allow users to specify the location of the file
they wish to play back. All three file formats are supported (Engineering, Hex, and Raw) for playback. In
addition, each time recording is stopped/started a new section is created. These sections can be
individually played back by using the drop down menu and associated VCR controls.