Motion Pro Revolver Throttle - Manual

Revolver Throttle Installation
Suzuki GSX1300R Hayabusa P/N 01-2665
The Revolver installation for the Hayabusa is unique in that the Revolver cables
are routed in a different manner from stock. The cables route from the throttle
body bell crank on the left, up the frame, and through the space between the left
fork leg and the steering head. The throttle is installed with the cables routed
over the top of the handlebar, and behind the master cylinder reservoir. All other
installation is according to the standard instructions included with the kit. Please
refer to the pictures below that illustrate the proper routing.
Cables mounted to the throttle body
and routed along the frame.
Route the cables between the fork
and the frame.
Cables are in front of the triple
clamp and over the bar and master
cylinder.
I01-2665 11/2011