Motion Pro Revolver Push Pull Throttle Kit - Manual

Revolver™ Push Pull Throttle Kit
Thank you for purchasing the Revolver™ Throttle Kit. You have in your hands one of the most
advanced yet easy to use tunable throttles ever developed. This product will allow you to set the
amount of throttle twist to suit your style and riding conditions. This throttle kit is meant for off-
road and closed course track use ONLY. This kit should only be installed by a professional
mechanic and must be installed and maintained in accordance to these instructions to work
properly. Warning: Incorrect installation or maintenance of this product could result in
great bodily injury or death. Always refer to a factory service manual in conjunction with these
instructions when installing or maintaining this throttle assembly.
Familiarizing yourself with the components of the kit
The kit contains:
1. Revolver™ throttle and its components
2. Throttle Cable
3. Revolver™ interchangeable reels
4. RoadControl™ grips (a.) for street or DirtControl™ grips (b.) for Off-Road applications
The throttle consists of the two piece throttle housing, the tube and four throttle reels in sizes
35mm, 40mm, 45mm and 50mm. The throttle housing incorporates a setscrew to fix the throttle to
the handlebar in applications that require a pin for mounting to a locating hole in the handlebar.
The throttle reels are designed so that they will only fit in one direction on the throttle tube and the
throttle tube has a locating ring to position it in the throttle. The throttle housing has a stop built
into the recess for the throttle tube locating ring. Always make sure the throttle is properly
assembled when installing it. If the components don’t fit easily together, something is in the wrong
position.
Never mix the components of this kit with any other throttles or cables. This kit is a stand-
alone assembly and any other components from any other assembly can cause the throttle not to
operate or possibly stick or drag, resulting in possible injury or death. Replacement Revolver™
throttle parts and Revolver™ cables are available through your local dealer or Motion Pro.
Some motorcycles have the engine kill and starter switches built into the throttle housing.
If this is the case with your motorcycle, you will need to purchase the accessory handlebar switch
part # 11-0057 to replace the stock switch assembly. The replacement switch is not included in
this kit.
I01-2614 7/2010
4 b.
4 a.
2
3
1