Nixeus Fusion HD User Manual - Manual (Page 112)

Nixeus Technology, Inc.
112
LCD Setting
The brightness of the LCD panel can be adjusted.
1. Go to Setup → System Setup → Other Settings → Advanced Setting → LCD Setting →
LCD Tone Level to adjust it.
Auto Sync
Some films are produced with 24 frames per second. You may see some poor quality on your screen
due to frame rate conversion.
1. Turn on Auto Sync and then the TV output will be adjusted automatically to the correct mode.
2. Make sure HDMI EDID is turned on at the same time.
Hard Disk Share Setup
Once you have installed a HDD into your Fusion HD, you will be able to see “Hard Disk Share Setup”
page so you can configure your HDD Settings.
Note: You can rename the default Share Name, Group Name, User Name and Password by
using the on-screen keyboard.