Troubleshooting – Nixeus Fusion HD User Manual User Manual
Page 114
Nixeus Technology, Inc.
114
Troubleshooting
•
No picture on the TV or poor display quality
Make sure your TV is turned on and switched to the correct input.
Make sure the Fusion HD is turned on and switched to the correct TV mode.
If the TV Mode that you are using is not the right one for your television, you may not be able to see
the display on television. To fix this problem, push the “Output” key on the remote control. You can
cycle through each of the possible TV modes to find and select the correct one.
Make sure you are using the correct video cables and that they are connected firmly to the Fusion
HD and to your TV.
The power cords for the Fusion HD and your TV are securely connected to a working
power source.
•
Unstable Display with 1080p24 films
Some films are produced with 24 frames per second. You may see some poor quality on your screen
due to frame rate conversion.
Select 1080p24 as the TV output mode and turn on the “Auto Sync” function.