Using the setup menu, Setup menu overview – Casio XJ-460 User Manual
Page 21
Using the Setup Menu
21
Using the Setup Menu
Pressing the [MENU] key while an image is being projected displays the setup menu on the
projected image. The setup menu can be used to configure a variety of different projector
settings. The following table shows the menu items that are available in the Setup Menu.
Setup Menu Overview
Main menu
Sub-menu
Sub-menu Item Type
*1
Input source
*2
See
page
R
C
S
V
–
Image
Adjustment
Brightness
Value Setting
31
Contrast
Value Setting
31
Sharpness
Value Setting
31
Saturation
Value Setting
31
Tint
Value Setting
*4 *4
31
Color Mode
Setting Screen
32
Color Balance
Setting Screen
32
Vertical Position
Value Setting
34
Horizontal Position
Value Setting
34
Frequency
Value Setting
34
Phase
Value Setting
34
Noise Filter
Selection
35
Restore Menu Defaults
Execution
35
Volume
Adjustment
Volume
Value Setting
*3
35
Restore Menu Defaults
Execution
35
Screen
Settings
Vertical Keystone
Correction
Value Setting
36
Horizontal Keystone
Correction
Value Setting
36
Aspect Ratio
Selection
*5
37
Resize Image To Fit
Selection
38
Projection Mode
Selection
39
Ceiling Mount
Selection
39
Startup Screen
Selection
40
No Signal Screen
Selection
40
Mute Screen
Selection
41
Restore Menu Defaults
Execution
41
*1 This is the sub-menu item type. Refer to the pages noted below for more information.
Value Setting:
Specifies a numeric value (
) page 26).
Selection:
Allows selection from multiple options (
) page 26).
Setting Screen: Numeric value specification or option selection on a separate setting
screen (
) page 27).
Execution:
Initializes a setting (
) page 28).
Information:
Displays information only (
) page 28).
*2 These columns indicate whether each item appears (
) or not (
) for each input
source (R = RGB, C = Component, S = S-VIDEO, V = Video, – = No input signal).
*3 This setting is for the currently selected input source.
*4 This setting can be configured only for an NTSC or NTSC4.43 signal.
*5 This setting can be selected only when the aspect ratio of the input signal is 4:3.