Casio XJ-460 - Manual (Page 48)

48
Using the Setup Menu
z Besides the menu operation explained above, the following operations can also be used
to turn off key lock.
z While the projector is on: Hold down the projector’s [ESC] key for about five seconds.
z While the projector is off: Simultaneously hold down the projector’s [ESC] and [
]
(power) keys for about five seconds. This turns on the
projector and also turns off key lock.
z You can use the above projector operations to turn off key lock if the remote controller
batteries unexpectedly go dead, etc.
■Option Settings1 J Power On Password
This sub-menu lets you turn the power on password on and off.
While the password is turned on, projector operation is impossible unless the correct password
is entered. For more information about the power on password, see “Password Feature” on
page 69.
Initial Factory Default Password
The following is the 8-key operation you should perform to input the initial factory default
password.
[AF/AK], [PAGE UP], [PAGE DOWN], [
S], [T], [W], [X], [MENU]
z Note that the projector’s password is not really a “word”, but rather a series of remote
controller key operations.
z If you need to keep projector operation secure, be sure to change the initial factory
default password to a different one as soon as possible.
z The password can be input using the remote controller only. Optimum security is ensured
by turning on the password and keeping the remote controller with you.
z For information about what you should do if you forget your password, see ”If you forget
your password...” on page 69.