Casio XJ-460 - Manual (Page 46)

46
Using the Setup Menu
■Option Settings1 J Auto Adjust
This sub-menu lets you specify whether or not auto adjustment should be performed (page 8)
when RGB is selected as the input source.
Input Source Specific Menu Items
Setting Explanations
On: Turns on auto adjustment, which is performed when RGB is selected as the input
source.
Off: Turns off auto adjustment.
Setting Storage
This setting is saved for the RGB input terminal only.
■Option Settings1 J Low-noise Mode (XJ-560 only)
The low-noise mode reduces the luminosity of the projection lamp and the speed of the
cooling fan, allowing quieter projector operation.
Input Source Specific Menu Items
Setting Explanations
On (low-noise mode): This mode reduces luminosity and fan motor speed for quieter
operation than the normal mode.
Off (normal mode): This mode projects at normal luminosity.
Setting Storage
A single setting is stored, which is applied to all input sources.
Input Source Available Items (Parentheses indicate defaults.)
RGB (On), Off
Component None
S-VIDEO
VIDEO
No Signal (On), Off
* Only when the currently selected input source is RGB.
Input Source Available Items (Parentheses indicate defaults.)
RGB On, (Off)
Component
S-VIDEO
VIDEO
No Signal