Casio XJ-460 - Manual (Page 42)

42
Using the Setup Menu
Input Settings
■Input Settings J RGB Input
This sub-menu lets you specify the type of input signal in accordance with the device
connected to the projector’s RGB terminal.
Input Source Specific Menu Items
Setting Explanations
RGB: Select this setting when a computer is connected to the projector’s RGB
input terminal. For details about connection, see “Connecting a Computer
to the Projector” in the separate “User’s Guide (Basic Operation)”.
Component: Select this setting when the projector’s RGB input terminal is connected
the component video output terminal of a video device using an optionally
available YK-3 component video cable. For details about connection, see
“Connecting to a Component Video Output Device” on page 66.
Setting Storage
This setting is saved for the RGB input terminal only.
■Input Settings J Video Signal, S-Video Signal
This sub-menu specifies the input signal for the projector’s VIDEO and S-VIDEO input
terminals.
Input Source Specific Menu Items
Input Source Available Items (Parentheses indicate defaults.)
RGB (RGB), Component
Component
S-VIDEO None
VIDEO
No Signal (RGB), Component
* Only when the currently selected input source is RGB or
Component.
Input Source Available Items (Parentheses indicate defaults.)
RGB None
Component
S-VIDEO (Auto), NTSC, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM
VIDEO
No Signal (Auto), NTSC, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM
* Only when the currently selected input source is VIDEO or
S-VIDEO.