Canon RE-350 - Manual (Page 18)

17
SOFT HARD RED BLUE
MANUAL
POWER
DETAIL
AUTO
WHITE BALANCE NEGA B/W
INPUT
SELECT
LOCAL
CONTROL
DISABLED
RS232C
CONTROL
To change to pictures via external input equipment, press the
INPUT SELECT button.
The INPUT SELECT indicator lights up and then,
•
Pictures via the equipment connected to the VIDEO IN terminal
will be output to the VIDEO OUT terminal.
• Pictures via the equipment connected to the S-VIDEO IN
terminal will be output to the S-VIDEO OUT terminal.
• Sound from the equipment connected to the AUDIO IN terminal
will be output to the AUDIO OUT terminal.
To change to pictures via the camera head, press the INPUT
SELECT button again.
By connecting external input equipment, such as a VCR, video camera, etc, to the VIDEO IN or S-VIDEO IN
terminals of the RE-350, you can project pictures via this equipment on the monitor. Pictures via the camera
head and external input equipment can be changed alternately each time you press the INPUT SELECT
button.
Changing to Pictures via External Input Equipment
MIC
1 2 3 4
SC
PHASE
H
MIC LEVEL
Use the microphone volume control knob to adjust the
volume.
Sound from the microphone can be recorded together with
pictures if outputting to a VCR.
If you connect a microphone to the MIC IN terminal of the RE-350 and connect a monitor with speakers, sound can be
output. Regardless of the selection of input equipment, sound from the microphone will be output to both R and L AUDIO
OUT terminals in monaural mode. For operation details, refer to the instruction manual of the equipment to be used.
Using a Microphone
• Regardless of the selection of input equipment, the RGB monitor projects
pictures via the camera head.
• Negative/Positive conversion and Color/Black-and-White switching will not
function with pictures via external input equipment.
• If a microphone is connected, sound from the microphone will also be output
to the AUDIO OUT terminal.
MEMO
Right side panel
Operation panel
Microphone volume control knob
RE-350 VIDEO V ISUALIZE R