Canon RE-350 - Manual (Page 20)

19
Using External Synchronization
The following illustration shows an example of connecting a camera for a video conferencing system to the
RE-350. The picture will not flicker when the INPUT SELECT button is pressed to change from video
captured by the camera of the RE-350 to that from external input and vice versa.
External synchronization can be used for compositing images from multiple
visualizers or video cameras on a single monitor, as well as for color
measurements using a computer. For mobe information, please contact your
dealer. NOTE
RE-350 VIDEO V ISUALIZE R
INPUT SELECT button
VIDEO IN
VIDEO OUT
Video Conferencing System
VIDEO IN
Camera of the RE-350
VIDEO OUT
EXT
External input
AUDIO
OUT
VIDEO S VIDEO RGB
R G
OUT EXIT
AC INLET
AC OUTLET
75 OFF ON
24/96
100/60 ID 0
ID 1
RS-232C
SYNC OFF ON IN B
R L SYNC
1 0
Rear panel
MIC
1 2 3 4
SC
PHASE
H
MIC LEVEL
Switches for adjusting horizontal phase and hue.
Set the selector according to the hue of
the reference signal so that the image
hue matches the document hue.
Hue selector
Use this volume for fine-adjustment
after changing the hue with the hue
selector.
Hue fine-adjustment volume
Horizontal phase adjust volume
Use this volume to align the horizontal
phase when mixing pictures.
Right side panel
If the RE-350 is the terminating equipment in your system using multiple external
synchronization input equipment, set this switch to ON.