O.S. Engines FS-40S-CX - Manual (Page 13)

LONG SOCKET WRENCH
Recommended for easy removal
and replacement of the angled
and recessed glowplug, the
O.S.Long Socket Wrench
incorporates a special grip.
SILICONE FUEL LINE
Heatproof silicone tubing of
approx. 5mm o.d. and 2mm i.d.
is required for the connection
between the fuel tank and
engine.
ELECTRIC STARTER AND STARTER BATTERY
Use a 12-volt electric starter
with suitable battery for starting
the engine.(FS-40S-C)
FUEL PUMP
For filling the fuel tank, a simple,
polyethylene "squeeze" bottle,
with a suitable spout, is required.
Model engine fuel is poisonous. Do not
allow it to come into contact with the
eyes or mouth. Always store it in a
clearly marked container and out of the
reach of children.
Model engine fuel is also highly
flammable. Keep it away from open flame,
excessive heat, sources of sparks, or
anything else which might ignite it.
Reminder!
BATTERY INTEGRATED GLOWPLUG HEATER
Commercialy available handy
glowplug heater in which the
glowplug battery and battery
leads are integrated.
as described in the RUNNING-IN paragraphs.
When engines are run at very high speeds and on
high-nitro fuels, glowplug elements will not last as
long.
12