Canon H12157 - Manual (Page 271)

Fr
e
q
u
e
nt
ly
As
k
e
d
Q
u
est
io
n
s
Chapter 13 Frequently Asked Questions 13-23
Printing Problems
If you are having problems printing with the LASER CLASS 2060P, check
the problems and solutions listed in the following table.
Problem Possible cause Solution
The Alarm lamp comes
on and the LASER
CLASS 2060P beeps
while printing? The LASER CLASS 2060P
may have a paper jam. Clear any paper jams as
described earlier in this
chapter.
If the LASER CLASS 2060P
has no paper jam, unplug it,
wait five seconds, then plug
it in again. If the problem is
fixed, the Alarm lamp will
be off, and the LCD display
will show the date and
receiving mode (standby
mode). If the Alarm lamp
stays on, call your local
authorized Canon Facsimile
Dealer.
Nothing prints? The power cord may not be
plugged in securely. Make sure the power cord is
plugged securely into the
unit and into a wall outlet.
The toner cartridge may need
to be replaced. Replace the toner cartridge.
See page 2-34.