User settings – Canon H12157 User Manual

Page 308

Advertising
background image

15-4

The Menu System

Chapter 15

USER SETTINGS

1.DATE & TIME

Set the date using the numeric buttons. Set the time (24-hour clock) using
the numeric buttons.

2.UNIT TELEPHONE #

Enter your fax number using the numeric buttons. (Up to 20 digits.)

3.UNIT NAME

This is the name that appears at the top of each fax page you send (up to 24
characters). See page 3-8.

4.TX TERMINAL ID

Print your ID (transmitting terminal ID) on each page you transmit.

TTI POSITION

OUTSIDE IMAGE

Terminal ID prints outside the image border.

INSIDE IMAGE

Terminal ID prints inside the image border.

TELEPHONE # MARK

You can prefix your number with the abbreviations FAX or TEL in your
sender ID.

FAX

Prefixes the number with the abbreviation FAX.

TEL

Prefixes the number with the abbreviation TEL.

5.SCANNING CONTRAST

Set the density of the reproduction.

LIGHTER

LIGHTER for dark originals.

STANDARD

Originals.

DARKER

DARKER for light originals.

6.OFFHOOK ALARM

Turn the offhook alarm off or on, which alerts you if the handset is not in the
handset cradle.

ON

Offhook alarm sounds if handset or extension telephone is left off the hook.

OFF

No offhook alarm.

7.VOLUME CONTROL

Adjust the volume of the fax unit.

CALLING VOLUME

2 (1 to 3)

KEYPAD VOLUME

2 (0 to 3)

ALARM VOLUME

2 (0 to 3)

LINE MONITOR VOL.

2 (0 to 3)

8.RX CALL LEVEL

Adjust the volume of incoming calls.

STANDARD

Level of volume is standard.

HIGH

Level of volume is high.

9.TEL LINE TYPE

Set the telephone line type.

TOUCH TONE

The telephone line is set for touch-tone dialing.

ROTARY PULSE

The telephone line is set for rotary pulse dialing. If you need to dial into an
information service that requires tone dialing, use the Tone button on the
operation panel.

(Default settings are shown in bold type)

Advertising