When focus mode is set to manual – Nikon n65 User Manual
Page 47
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
■ When focus mode is set to Manual
Single Area Mode is automatically selected when the focus mode
selector is set to M (manual, page 45).
Set the focus mode selector to M (manual)
and rotate the Command Dial while pressing
the focus area button to select focus area.
• Single Area Mode
Focus is obtained only at the selected focus area when
using the manual focus with Electronic Rangefinder
(page 45).
• Rotating the Command Dial while pressing the focus
area button changes the display as follows:
H HigS FS.S
►CJ
J
> Confirm selected focus area in the LCD panel and
viewfinder.
47
Advertising
This manual is related to the following products: