Film rewind, Mid-roll rewind, Eiii ( i s – Nikon n65 User Manual

Page 66

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Film Rewind

This section explains mid-roll rewind and what to do if the film does not

rewind.

Mid-roll rewind

• To rewind film at mid-roll, press the two film rewind

buttons Q±! simultaneously for approx. 1 sec.

• o . o . and then o appear in the LCD panel during film

rewind and the frame counter counts backwards until
rewind is complete.

• Film is completely rewound when a blinking £ shows in

the frame counter. (E appears without blinking when the
exposure meter is off.) Make sure £ is blinking, open the
camera back and remove the film cartridge.

om

Eiii ( i s ;

'

^

611435

}

If film does not start to rewind or film rewind

stops at mid-roll

• When battery power is very low, or at low temperatures,

film may not start rewinding or film rewind may stop at

mid-roll, and o.. and frame number will blink in the
LCD panel. In this case, turn the power switch off,

change batteries, then turn the power switch on and

press the two film rewind buttons

02! simultaneously

for approx. 1 sec. to rewind film again.

66

Advertising
This manual is related to the following products: