Cary Audio Design HD Surround Sound Processor Cinema 11a - Manual (Page 42)

SETUP MENU
41
To set Analog IN Configuration:
1. Press the SETUP button to enter the SETUP MENU.
The SETUP MENU/LISTENING PROFILES appears.
2. Press the  button until INPUT is selected.
The SETUP MENU/ INPUT menu appears.
3. Press the ENTER button to enter the CHANGE INPUT NAMES setup menu.
4. Press the  button until SET ANALOG IN CONFIG is selected.
5. Press the ENTER button to enter the INPUT 1 analog in config menu.
6. Use the  and  buttons to select the mode.
You can select the BYPASS mode or DSP mode.
7. Press the  button when you have made a selection.
Repeat steps 6 for the INPUT 2, INPUT 3, INPUT 4, INPUT 5, INPUT 6, INPUT 7, INPUT
8, 7.1 IN and TUNER.
8. Press the  button to select BACK and press the ENTER button to return to the SET
ANALOG IN CONFIG. menu, or press the SETUP button to exit the SETUP MENU.
NOTE: As you can see from these settings, it is possible to use the Cinema 11a as an
analog stereo preamp and as a surround sound preamplifier at the same time.
SET HDMI IN AUDIO:
To set HDMI IN audio:
1. Press the SETUP button to enter the SETUP MENU.
The SETUP MENU / LISTENING PROFILES appears.
2. Press the
 button unit INPUT is selected.
The SETUP MENU / INPUTS menu appears.
3. Press the ENTER button to enter the set HDMI in audio setup menu.
4. Use the  and  buttons to select the Input Audio format.
You can select the Bitstream or LPCM Input Audio format.
5. Press the  button when you have made a selection.
Repeat step 4 for HDMI 2.
6. Press the  button to select BACK and press the ENTER button to the Set HDMI in audio
menu, or press the SETUP button to exit the SETUP MENU.