Philips DSS350S1 - Manual (Page 7)

INSTRUCTIONS FOR USE
Controls Installation
® POWER
switches the speakers on and to standby
(D DBB (Dynamic Bass Boost)
enhances the bass
(3)
INCREDIBLE SURROUND
creates a surround sound effect
(J) 0
connect headphones (not supplied)
® VOLUME-/ +
adjusts the volume level (only works when
USB is connected)
(D SPEAKER OUT
connect the left speaker
® POWER IN
connect the supplied AC/DC adapter
(8) LINE IN
Connect the soundcard of your computer
when not using Windows 98 and USB. Can
also be used to connect analog volume
controlled appliances (e. g. CD player).
Note: If you are only using the UÑE IN jack, the
volume has to be adjusted with your
soundcard.
® SUBWOOFER OUT
connect an additional subwoofer
® USB
connect to a USB port
Important!
The supplied soñware is not compatible with
early versions of Toshiba's Infinia in-touch
modules, and that installing the software on a
Toshiba Infinia system will render the Infinia
system inoperable.
1 Windows 3.1 or a computer without USB
Connect the supplied plug cord to the LINE IN
jack of the right speaker and your soundcard.
Note: The volume has to be adjusted with
your soundcard.
or
or
Windows 95 and USB
• Connect the supplied plug cord to the
LINE IN jack of the right speaker and your
soundcard.
• Connect the USB cable to a USB port.
• Follow the instructions that come with the
supplied CD ROM to install the USB drivers
on your Windows 95 system. Do not use
the CD ROM when operating a Toshiba
Infinia!
Windows 98 and USB
Connect the USB cable to a USB port.
Note: If a soundcard is installed on your
Windows 98 system, follow the Windows
98 setup as described later on.
Connect the left speaker to the SPEAKER OUT
jack of the right speaker.
Connect the AC/DC adapter to the POWER IN
jack at the rear of the right speaker.
Connect the AC/DC adapter to a wall socket.
The voltage mentioned on the label of the
AC/DC adapter must match the local power
voltage.
jsk :.
i-iS ^
vet
'WV