Philips VRA456AT - Manual (Page 21)

Remote Control Buttons (contad) 21
VCR/TV Button ——————
After pressing the VCR button, press
this button to select the signal that
your TV receives.
® VCR Position
Use to watch a tape, to watch a pro­
gram while recording it, or to watch
a TV broadcast using the CH(annel)
A/T or Number buttons to change
channels at the VCR.The VCR light
will appear on the display panel
when the VCR is In VCR position.
• TV Position
Use to watch TV (selecting channels
at the TV) or to watch one program
while recording another. Details are
on page 31. The VCR light will not
appear when the VCR is in TV posi­
tion.
After pressing the TV button, press
this button to select TV mode or
Auxiliary mode at the TV.
SPEED Button ————
Press to select the recording speed
(SP or SLP). Details are on pages 37
and 52.
EXIT/STATUS Button
Press to exit the on-screen menus.
Press to bring up the status display
for five seconds. Details are on page
25.
When tape playback is stopped,
press repeatedly to see the real-time
counter, the current channel, or the
current time on the display panel.
During tape playback, press repeat­
edly to see the current time or the
real-time counter on the display
panel.
For some PHILIPS and PHILIPS MAG-
NAVOXTVs only:
Press the TV button, then press this
button to access the TV on-screen
displays or to exit the TV menu.
For other manufacturers'TVs or Cable
Boxes/DBS:
After pressing the TV or CBUDBS
button, the EXIT/STATUS button will
function as an ENTER button at the
TV or Cable Box/DBS.
STILL/SLOW Buttons
While recording, press STILL/SLOW
!► to temporarily stop the record­
ing. Press a second time to resume
normal recording. Details are on page
29.
During tape playback, press
STILL/SLOW !► once to freeze the
picture. Press repeatedly to advance
the Still picture frame by frame.
Details are on page 48.
During tape playback, press and hold
for more than three seconds to play
the tape in slow motion. Details are
on page 48.
-TIMER Button
Press to access the timer recording
menu. Details are on pages 34-39.
INDEX Buttons
When tape playback is stopped,
press to search for index codes
recorded on the tape. Details are on
page 42.
AUDIO/MUTE Button
Press the TV button, then press the
AUDIO/MUTE button to eliminate
the TV’s sound. Press again to
restore the sound. Or, press the
VCR button, then press the
AUDIO/MUTE button to select
MONO or HIFI (VRA656 only).
Details are on pages 43-45.
SKIP SEARCH Button
Press during tape playback to fast
forward 30 seconds of a tape.This
feature will only work with tape
segments recorded in SP or SLP
speed.
SMARTPICTURE Button
Press to select the SmartPicture
mode. Details are on page 47.
Helpful Hint
This remote control may or may
not operate your TV or Cable
Box/DBS. Or, it may only work
some features of this equipment.
See pages 26-27 for details.