Rear panel – Philips VRA456AT User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
24
Rear Panel
ANT(enna) IN Jack
Connect your antenna or cable here. Details are on pages
6-9.
AUDIO OUT jacks
Connect cables going to the AUDIO IN jacks of a camcorder,
another VCR, or an audio system here. Details are on pages 41 and
44.
TheVRA456 has a single AUDIO OUT Jack.The VRA656 (pic
tured) has Right and Left AUDIO OUT Jacks.
AUDIO IN Jacks
Connect cables coming from the AUDIO OUT jacks of a cam
corder, another VCR, or an audio source here. Details are on page
4/.TheVRA456 has a single AUDIO IN Jack.The VRA656 (pic
tured) has Right and Left AUDIO IN Jacks.
CH3/CH4 Switch
Set to channel 3 or 4 to use your TV with your VCR. Set
your TV to the same channel. Details are on pages 6-9.
VIDEO IN Jack
Connect a cable coming from the VIDEO OUT jack of a
camcorder or another VCR here. Details are on page 41.
VIDEO OUT Jack
Connect a cable going to the VIDEO IN jack of a cam
corder or another VCR here. Details are on pages 41 and 44.
"“AC Power Cord
Connect to a wall outlet (120 V) to supply power to
the VCR.
RF OUT Jack —
Use the supplied RF coaxial cable to
connect this jack to the ANTENNA
IN Jack on your TV or to the IN Jack
on your Cable Box/DBS (if applicable).
Details are on pages 6-9.