Philips VRA456AT - Manual (Page 23)

Front Panel 23
STOP/EJECT Button
Press once to stop the tape. When
tape playback is stopped, press to
eject the tape.
POWER Button
Press to turn the VCR power on and off.
STILL/PAUSE Button
During tape playback, press once to freeze the
picture. Press repeatedly to advance the Still pic­
ture frame by frame. Press and hold for three sec­
onds to start Slow Motion playback. Details are on
page 48. During recording, press to temporarily
stop the recording. Details are on page 29.
FF (Fast Forward) Button __
When tape playback is stopped, press to
fast forward the tape at high speed.
During tape playback, press to fast
forward the tape while the picture stays
on the screen. Details are on page 48.
REW(ind) Button
When tape playback is stopped,
press to rewind the tape at high
speed. During tape playback, press
to rewind the tape while the pic­
ture stays on the screen. Details
are on page 48.
Front VIDEO/AUDIO
In Jacks
Connect cables coming from the
VIDEO and AUDIO OUT Jacks
of another VCR or a camcorder
here. Details are on page 41. (The
VF(A456 has one AUDIO In jack.)
To access these jacks, gently flip
down the plastic cover.
►/OK Button
Press to change the setting of
a menu item or to advance to
another menu.
MENU/EXIT Button —
Press to access or remove the
VCR menu.
VCR/TV Button ————
Press to select the signal that your TV receives.
VCR Position:
Use to watch a tape, to watch a program while recording it, or to
watch a TV broadcast using the CH(annel) A/W or Number buttons
to change channels at the VCR. The VCR light will appear on the dis­
play panel when the VCR is in VCR position.
TV Position:
Use to watch TV or to watch one program while recording another.
Details are on page 3/.The VCR light will not appear on the display
panel when the VCR is In TV position.
PLAY Button
Press to play a tape. Press
to release Slow, Still, or
Search mode and return
to normal playback.
Details are on page 48.
REC(ord)/OTR Button
Press once to record.
Details are on page 29.
Press repeatedly to start a
One-Touch Recording.
Details are on page 30.
CH(annel) A/V Buttons
Press to scan through the VCR’s
channels. During tape playback,
press to manually adjust the track­
ing. Details are on page 51.
Press to select an item in the VCR’s
on-screen menu.