Philips US2-VOIP001 User Manual
Ipp200 flat screen mount kit
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
IPP200 Flat Screen Mount Kit
Installation Instructions
IPP200 Flat Panel Mount Kit
Plastic Tab
Top View
M0UIITIPP200 Hangar Here
Double Sided Tape Pad
(affix to back of Mcmitori
1) Remove double sided tape paper from Tape Pad
2) Affix to back of Flat Screen Monitor (make sure that the clear plastic tab
sticks out at least 2 V
2
inches or 7cm)
3) Affix IPP200 Hanger to clear plastic area on FLAT SCREEN MOUNT
The Final result should look like this:
Advertising
Table of contents