Philips 19SV07B - Manual (Page 3)

t H
ooking
U p Y
our
TV (A
ntenna
/C
able
C
onnections
A ntenna
C ombination UHFA^HF
A combination antenna
receives normal
broadcast channels (VHF
2-13 and UHF 14-69).
Your connection is easy
since there is only one
750 (ohm) antenna plug
on the back of your TV -
and that’s where the anten­
na goes.
{ beg IN)-
-<$>i If your antenna has a
round cable (750) on the end,
then you're ready to connect it
to the TV.
If your antenna has flat twin-
lead wire
(3000), you first
need to attach the antenna wires
to the screws on a 300 to 750
adaptor.
<S> Push the round end of the
adaptor (or cable) onto the
ANT(enna) IN plug on the
rear of the TV.
If the round
end of the adaptor or cable is
threaded, screw it down tight.
Back of TV
Combination
VHF/UHF
Antenna
(Outdoor or
Indoor)
Round Cable
750
Remember, g
be sure to set the
TV for the type sig­
nal you've connect­
ed (see Automatic
Channel Setup,
page 5).
To set the TV to
select only the
channel numbers in
your area, see
Automatic Channel
Setup, page 5.
S eparate UHFA^HF
y bu may have two sepa­
rate antennas. One
antenna is for VHF chan­
nels (2-13) and the other
antenna is for UHF chan­
nels (14-69).
For homes with separate
UHF/VHF antennas, you
will need an optional
”combiner" before you can
connect the antenna signal
to the TV.
{BEGINl
<i>
Attach the separate
UHF and VHF antennas to
the correct screws on the
combiner.
<l>
Push the round end of the combin­
er onto the ANT(enna) IN plug on the
rear of the TV.
U/V Combiner
Outdoor VHF
Antenna
(Twin-lead 3000)
Outdoor VHF Antenna
(Round 750 cable)
To order __
any optional acces­
sory, contact your
dealer or call the
toll-free accessory
ordering number
(1-800-292-6066).
® UHFA^HF
Combiner:
(SBV1133A01)
® 75-300 0
Adaptor:
(SBV1113A01)
® 300-750
Adaptor:
(4835 218 27003)
Round Cable 750
- 2 -