Canon A85 - Manual (Page 109)

107
Various Functions
3
Set the camera's mode switch to .
4
Press the ON/OFF button until the
power lamp lights green.
z Windows
J Proceed to steps 5 and 6 below.
z
Macintosh
J Refer to the Canon Digital Camera Software
Starter Guide Disk and download images.
DIGITALTerminal
1.Open the terminal cover with
your finger nail.
2.Insert the connector until it clicks.
Always grasp the
connector to remove
the interface cable from
the camera's DIGITAL
terminal.
5
Select [Canon CameraWindow] in
the events dialog that appears on
the computer and click [OK] (first
time only).
If the events dialog fails to appear, click the
[Start] menu, followed by [Programs] or
[All Programs], [Canon Utilities],
[CameraWindows], and [CameraWindow -
Set Auto-Launch].
149_CEL_CUG.book Page 107 Friday, April 30, 2004 3:13 PM