Canon A85 - Manual (Page 129)

127
Troubleshooting
Image not showing
on TV. Incorrect video system setting. z Set the video system to the appropriate
setting, NTSC or PAL, for your TV.
The mode dial is turned to
(Stitch Assist).
z Turn the mode dial to any mode other than .
Zoom does not
operate. Zoom lever was pressed while
shooting in Movie mode. z Operate the zoom before shooting in Movie
mode.
Reading images
from CF card is
slow. CF card was formatted in another
device. z Use a CF card formatted in your camera. See
Formatting a CF Card (p. 21).
Recording images
to CF card takes a
long time.
Problem Cause Solution
149_CEL_CUG.book Page 127 Friday, April 30, 2004 3:13 PM