Char-Broil 463247310 - Manual (Page 15)

3
4
Place lower back panel between side panels at rear of bottom shelf. Make sure the slots are positioned as shown (A). Secure
lower back panel to side panels using two 1/4-20x1/2” screws, 7mm lock washers, and 7mm flat washers on each side.
A
Lower back panel
1/4-20x1/2” screw 7mm lock washer
7mm flat washer
15
This step requires two people
to lift and position grill head
onto cart. Carefully lower the grill
head onto the cart, aligning slots at
bottom of grill head with posts on
cart side panels. Make sure the
regulator hose is hanging outside
the cart. Grill head must face open
side of cart.
Grill head
Regulator hose
Vertical flange
The vertical flange should be on left side
when the lower back panel is properly
installed