Chicco Lullaby LX/SE - Manual (Page 35)

35
Operate NiteLite Electronics
Para utilizar los componentes electrónicos NiteLite
Fonctionnement du module électronique NiteLite
With the switch in the MELODY ( ) or SOUND ( ) position you can activate
the following.
VOLUME: To increase the sound, press the
( )
side of the button. To decrease
the sound, press the
( )
side of the button.
VIBRATION: Push the VIBRATION
( )
button once to activate vibration cycle
and it will automatically turn off in 10 minutes. To immediately stop the vibration
cycle, press the VIBRATION
( )
button again. Note: When the LIGHT
( )
button is pushed in the middle of the vibration cycle the light will turn off when
the vibration cycle ends.
LIGHT: Push the LIGHT ( ) button once to activate light cycle and it will
automatically turn off in 10 minutes. To immediately stop the light cycle, press
the LIGHT ( ) button again. Note: When the VIBRATON ( ) button is pushed in
the middle of the light cycle the vibration will turn off when the light cycle ends.
MUSIC/FAST FORWARD: Push the MUSIC/FAST FORWARD ( / ) button once,
it will move to the next melody/sound, play for the 10 minute cycle and stop. If you
press and hold down the MUSIC/FAST FORWARD ( / ) button for 2 seconds, it
will play the current melody/sound continuously for 5 minutes and stop.
23A. The Lullaby NiteLite has (3) modes:
SOUND: The SOUND ( ) position plays
nature sounds. The SOUND ( )
selection will cycle through 3 different
sounds for 10 minutes and go into
standby/sleep mode. MELODY: The
MELODY ( ) position (2) plays soothing
music. The MELODY ( )selection will cycle
through 5 different songs for 10 minutes
and go into standby/sleep mode. OFF: The
(OFF) position will turn OFF all electronics.
To prolong life of batteries, make sure the
power switch is in the OFF position when
not in use.
23