Philips VRB661AT User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
/
0
Hookups with a Stereo TV
I
Connect the antenna or cable to the ANT(enna) IN Jack on the back of the VCR.
2
Connect a video cable to the yellow VIDEO OUT Jack on the back of the VCR.Then, connect
the other end of the video cable to the VIDEO IN Jack on your TV.
3
VRB66I
Connect a stereo audio cable to the red and white AUDIO OUT Jacks on the back of the
VCR.Then, connect the other end of the audio cable to the AUDIO IN Jacks on your TV.
3
VRB46I
Connect an audio cable to the white AUDIO OUT Jack on the back of the VCR.Then, connect
the other end of the audio cable to the AUDIO IN Jack on your TV.
(If your TV has Right and Left AUDIO IN Jacks, you must use a“Y” splitter audio cable as illustrated to deliver
audio to the TV’s right and left channels.) This hookup will not give you stereo sound.To get stereo sound, use
the connections on pages six - seven and select the channel to be viewed at the TV (with the VCR turned off).
4
Turn on your TV, making sure it is in Line Input mode. Please refer to your TV owner’s manual for details.