Philips VRB661AT User Manual

Page 36

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

36 Timer Recording (contad)

Checking or Cancelling Timer Recordings

I

With the VCR on and in VCR position (the VCR light will appear

on the display panel), press the VCR button, then press the

MENU button.

2

Press the PLAY/.A. button or the STOP/^ button to select

PROGRAM, then press the F.FWD/>- button.

3

Press th& PLAY/

a

, button or the STOP/^ button to select

PROGRAM REVIEW, then press the F.FWD/^ button. The

timer recording information for the program in the lowest num­

bered slot will appear on the screen. If no timer recordings are
set, nothing will happen when you press the F.FWD/^ button.

4

Press the F.FWD/^ button repeatedly to review all pro­

grammed timer recordings. If you don’t press the F.FWD/^

button within 10 seconds, the VCR will automatically display infor­
mation about the next programmed timer recording.This will con­

tinue until all timer recordings have been displayed.Then the menu

will disappear.

5

To cancel the timer recording displayed, press the CLEAR

button. Either the display will disappear or information about
other timer recordings will appear. If you do not press any other

buttons, the display will disappear after all timer recordings have
been displayed.

6

Repeat steps I - 4 to make sure you have cleared the cor­

rect timer recording.

Helpful Hints

• CLASH may fash on the screen

when you finish setting a timer
recording. This means that the timer
recording you just programmed and
another timer recording overlap. The

current timer recording will not take
place. You may choose to cancel the

overlapping timer recording.

• To stop a started timer recording,

press the STOP/EJECT button on
the VCR.

If the preset time for a timer

recording comes up during an OTR,

the OTR has priority. A message will

remind you when the timer record­
ing was scheduled to begin. You may

let the OTR continue; the timer

recording will not take place. Or,

stop the OTR and turn off the VCR
immediately.The timer recording will

take place if you turn off the VCR

before the timer recording's sched­

uled start time.

See page 52 for more hints.

Advertising