Philips QT4070-32 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Cleaning

I

Always turn Trimmer OFF before cleaning.

I Do not use abrasive cleaning agents,

scourers or aggressive liquids such as alcohol,

benzene, bleach or acetone to clean the

Trimmer.

I Never clean, remove or replace trimming comb

with motor ON.

I Do not apply pressure to cutters.
I Do not touch cutters with hard objects as this

may damage them.

I Do not use while bathing, showering or

immerse the Trimmer in water or other liquids

as damage to Trimmer may occur.

I Never use sharp or hard objects to clean the

filter to avoid damaging it.

I

If cut hairs have accumulated in the trimming
comb area, turn Trimmer off, pull trimming
comb off Trimmer and remove hairs by
shaking and/or blowing.

Hair Collection Chamber

n Turn the Trimmer OFF.

Q Open the lid of the Hair Collection

chamber (fig. 12).

D

Remove the hairs by carefully shaking them

out or by brushing them out with the
cleaning brush supplied (fig. 13).

Q Clean the filter inside the hair collection

chamber with the cleaning brush (fig. 14).

B Close the lid of the hair collection chamber.

I When trimming extremely long, dense beards,

it may be necessary to empty the Hair
Collection Chamber during the trimming

session in order to maintain optimal suction

performance.

I If suction performance is not as strong as usual.

Hair Collection Chamber may require

emptying to restore optimal performance.

I It is recommended that the Hair Collection

Chamber be emptied and cleaned out after
each use.

I Do not operate the Trimmer with the Hair

Collection Chamber cover opened.

Trimmer

D Make sure the Trimmer is turned OFF and

disconnected from the electrical outlet.

B Remove the trimming comb (fig. 10).

B

Remove the cutting unit (fig. 15).

Q Clean the cutting unit and the inside of the

Trimmer with the brush supplied (fig. 16).

H Put the cutting unit and the trimming

comb back onto the Trimmer (fig. 17).

Replacing The Cutting Unit

If vour cutters and filter become damaged or

worn, do not continue using the Trimmer. Replace

cutters and/or filter immediately.

This Trimmer has no other user-serviceable parts.

For assistance call I -800-243-3050.

Assistance

For Assistance, visit our website:

www.philips.com/support or

call 1-800-243-3050

Information is available 24 hours a day, 7 days a

week

Advertising
This manual is related to the following products: