Curtis Mathes BLU-RAY DISC CMMBX72 - Manual (Page 28)

Connections
Connecting to an audio system ( DOLBY Digital, DTS amplifier)
1. If using an optical cable (not included), connect the DIGITAL AUDIO OUT (optical) terminal on the rear of the
Blu-ray disc player to the DIGITAL AUDIO IN (optical) terminal of your Amplifier.
2. If using a coaxial cable (not included),connect the HDMI, COMPONENT, S-VIDEO or VIDEO OUT terminals on
the rear of the Blu-ray disc player to HDMI, COMPONENT, S-VIDEO or VIDEO IN terminal of your TV.
3. Turn on the Blu-ray disc player, TV and Amplifier.
Press the input select button of the Amplifier to select the external input in order to hear sound from the
Blu-ray Disc player. Refer to your Amplifier's user manual to set the Amplifier's audio input.
[NOTE]:
Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the
speakers and your ears.
Please set the audio in the menu screen according to the Amplifier.
The position of terminals may vary depending on the Amplifier. Please refer to the use's manual of your
Amplifier.
When using this connection, Blu-ray Discs with an LPCM audio soundtrack will only be heard over the front
two channels.
・
・
・
・
OPTICAL
2-Channel stereo amplifier
COAXIAL
or
26