Curtis Mathes BLU-RAY DISC CMMBX72 - Manual (Page 54)

Troubleshooting
PROBLEM SOLUTION
・ Press the button (in front panel) for more than 5 seconds with
no disc inside. All settings will revert to the factory settings.
・ Press the button (in front panel) for more than 5 seconds with
no disc inside. All settings including the password will revert to the
factory settings. Don't use this unless absolutely necessary.
・ Go to the contents and find the section of the instruction book that
contains the explanations regarding the current problem, and
follow the procedure once again.
・
・ Make sure that the disc is not dirty or scratched.
Clean the disc.
・
・
Check the connection between the TV and the HDMI jack of the
Blu-ray disc player.
Check if your TV supports 480p/720p/1080i/1080p HDMI input
resolution.
・ If random noise appears on the screen, it means that TV does not
support HDCP (High-bandwidth Digital Content Protection).
If the HDMI output is set to a
resolution your TV cannot
support (for example, 1080p),
you may not see a picture on
your TV
Forgot password
If you experience other problems
The picture is noisy or distorted
No HDMI output
Abnormal HDMI output screen
52