Curtis Mathes BLU-RAY DISC CMMBX72 - Manual (Page 40)

System setup
Note:
Even when PCM Down Sampling is set to Off, some discs will only output down sampled audio through the
coaxial and optical digital outputs.
Digital Output - HDMI:
If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS), you should set
Digital Audio to PCM.
If your TV is not compatible with LPCM sampling rates over 48kHz, you should set PCM Down Sampling to On.
This is only active when a Dolby Digital signal is detected.
Off: You can enjoy the movie with the standard Dynamic
Range.
On: When Movie soundtracks are played at low volume or
from smaller speakers, the system can apply
appropriate compression to make low-level content
more intelligible and prevent dramatic passages from
getting too loud.
・
・
・
Dynamic Compression
・
・
Digital Output
PCM Down Sampling
Dynamic Compression
General
Video
Language
Parental
Audio
On
Off
38