Philips 32PT6441-37 - Manual (Page 12)

I
M
onitor
O
ut
(
put
) C
onnections
7 ~he Audio/Video (Monitor) Output
jacks are great for recording with
a VCR or used to connect an exter­
nal audio system for better sound
reproduction.
AUDIO SYSTEM
CONNECTION:
Connect one end of the
R(ight) and L(eft) AUDIO
(Monitor Out) jacks on the TV
to the R and L audio input jacks
on your amplifier or sound sys­
tem. Set the audio system’s vol­
ume to a normal listening level.
2 T\irn the TV and audio sys­
tem ON. To adjust the volume
on the audio system, you will
need to change the volume at
the external audio system, not
the television.
SECOND VCR CONNECTION:
NOTE: Refer to panel number 4 for
the proper hookup of the first VCR.
Follow the instructions on how to
tune to the AV1 channel to view a
pre-recorded tape.
The following steps allow you to
connect a second VCR to record
the program while your watching
it.
Connect one end of the yellow
Video Cable to the Monitor
Out VIDEO plug. Connect the
other end to the VIDEO ESf plug
on the second VCR.
Connect one end of the red
and white Audio cable from
the Monitor Out AUDIO L and
R plugs on the TV to the
AUDIO IN plugs on the VCR.
Turn the Second VCR ON,
insert a VHS tape and it’s
ready to record what’s being
viewed on the TV screen.
3
5
AUDIO SYSTEM CONNECTION:
Audio Cables
(Red and White)
SECOND VCR CONNECTION:
Back of TV
2nd VCR with Audio and
Video Input Jacks
1st VCR
(refer to panel 4 for
proper connection)