Direct cable connection, Elpful – Philips 32PT6441-37 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
B
asic
A
ntenna
and
C
able
C
onnections
J
\^ur home's signal input might
J.
come from a single (75 ohm)
round cable, a Converter Box, or from
an antenna. In either case the connec
tion to the TV is very easy.
I
lf your Cable TV signal or
Antenna signal is a round
cable (75 ohm) then you're
ready to connect to the TV.
If your antenna has flat twin-
lead wire (300 ohm), you first
need to attach the antenna wires
to the screws on a 300 to 75 ohm
adapter.
If you have a Cable Converter
Box: Connect the Cable TV sig
nal to the Cable Signal IN(put)
plug on the Converter.
Antenna Connection
Connect the Cable TV cable or
Antenna cable (or 300 to 75 ohm
adapter) to the 75Q plug on the
TV.
If you have a Cable Converter
Box: Connect the OUT(put) plug
from the Converter to the 75Q
plug on the TV.
H
elpful
H
int
After using the AutoProgram Control,
press the CH + and - buttons to scroll
through all the channels stored in the
television’s memory.
Direct Cable Connection
Cable signal
coming from
Cable Company
75£i Round
Coaxial Cable
Jack Panel
Back of TV