Philips 26LL500 - Manual (Page 16)

□
TiiK
T imer - S eu ing
Acriwvi
e
to
ON
or
OFF
After you have set the Time, Start
Time, Stop Time, and Start
Channel, the timer must be set to
come on ONCE or DAILY, or
turned OFF through the ACTIVATE
control.
<$>
Press the MENU button on the
remote control to show the
onscreen menu.
<f> Press the CURSOR DOWN
I button twice to highlight FEA­
TURES.
<|> Press the CURSOR RIGHT
' button and the menu will shift to
tile left. TIMER will be highlight­
ed.
<|> Press the CURSOR RIGHT
' button again to shift the display to
the left. Then press the CURSOR
DOWN button repeatedly until the
ACTIVATE control is highlighted.
Press the CURSOR RIGHT
button again to set ACTI VATE to
ONCE; press the CURSOR
RIGHT button again for DAILY;
and press the CURSOR RIGHT
button again to toggle ACTIVATE
to OFF.
<|> Press the STATUS/EXIT but-
' ton to remove the menu ftom the
screen. _
S m a r i l i l i p
Remember, before set­
ting the TIMER controls,
the TV’s clock must be set to the
correct time manually (see page
12) or by using the AutoChron™
feature described on page 4 of the
Quick Use and Installation Guide.
Try it! After following the steps on
pages 12-17, use your TV as an
alarm clock.
16