1 ii – Philips 26LL500 User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
S
o u n d
- U
s i n g
t h e
S
u r r o u n d
S
o u n d
E
x t e r n a l
S
p e a k e r
C
o n n e c t i o n s
:'»l(
___
adding optional external
j
D speakers to the TV’s sound sys
tem, you can create the feeling of
reflected sound that surrounds you
at a movie theater or concert hall.
tBEOlUj
Connect both external speak
ers to flie speaker wire terminals
on the TV.
Recommended speakers: 8 ohm,
15 watt minimum. Be sure the (+)
and (-) speaker wires are connect
ed to the correct R(ight) and L(eft)
speaker terminals on the TV.
Place the speakers so that the
viewing area is between the TV
and the rear surround speakers.
(See overhead view drawing.)
Ttirn the TV and the
" STEREO control ON.
After setup, whenever a stereo sig
nal is received, the audio will be
heard in Surround Sound.
Remember, Surround
^ Sound will not work with
only one speaker connected, nor
with a monaural audio source sup
plied, unless the Incredible
Surround feature is turned ON
(see page 31).
BACK OF TV
==l
1 ii
, REAR SURROUND SOUND
^SPEAKER TERMINALS
REAR SURROUND SOUND SPEAKERS
NOTE: The rear Surround Sound speakers
will not be heard at the same volume level as
the front TV speakers. The rear speakers are
intended to give a background noise effect that
requires a lower volume level than the TV’s
front speakers.
REAR SPEAKER
REAR SPEAKER
PRIMARY VIEWING AREA
35