Pip - more connections (cont’d) – Philips 26LL500 User Manual
Page 47
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PIP
- M
o r e
C
o n n e c t i o n s
(
c o n t
’
d
)
VCR and DVD C o n n e c t i o n s
^7~fie
steps for hooking up a VCR
J.
(video cassette recorder), DVD
(digital video disc player), or simi
lar device to work with PIP are
shown here.
4
>
First, connect the original
cable TV signal or antenna signal
to tile ANTENNA IN jack on the
back of the VCR.
Connect the ANTENNA OUT
' Jack on the rear of the VCR to the
ANT(enna) jack on the back of the
TV.
Connect the yellow video
cable from the VIDEO OUT jack
on the VCR to the AVI in(put)
VIDEO jack on the TV. Then con
nect the red and white audio
cables from the AUDIO OUT jacks
(L and R) on the VCR to the AVI
in(put) AUDIO jacks on the rear of
the TV.
Connect the yellow video
cable from the VIDEO OUT jack
on the DVD or similar device to the
AV2 in(put) VIDEO jack on the
TV. Then connect the red and
white audio cables from the
AUDIO OUT jacks (L and R) on
the DVD or similar device to the
AV2 in(put) AUDIO jacks (L and
R) on the back of the TV.
NOTE; Remember that when you
are selecting the PIP SOURCE, the
VCR will appear on the AVI chan
nel and the DVD or similar device
will appear on the AV2 channel.
BACK OF TV
OUTSIDE UHFWHF
AMTENNAOR
CABLE TV SIGNAL
47