Connecting to a tv, Selecting the output sound – Philips DVD850AT99 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connections ^ For details of output sound, see ¡
2
^.
Connecting to a TV
Connect the DVD video player to your TV.
Connecting to a TV
Selecting the output sound
From the on-screen displays, set the “Audio Out Selecf to “Analog 2ch.” ¡32>
To wall outlet
^iNotes^
manual for details.
' Refer to the owner’s manual of the connected TV as well.
■ When you connect the DVD video piayer to your TV, be sure to turn off the power and unplug both units from the wall outlet before
making any connections.
' If your television set has one audio input jack, use a Y cable adapter (not supplied) to connect to your TV.
' Connect the DVD video piayer directiy to your TV. If you connect the DVD video piayer to a VCR, TVA/CR combination or video selector,
the playback picture may be distorted as DVD video discs are copy protected.
Connecting headphones
Connect headphones to the PHONES jack on the front panel
using a stereo plug.
Before connecting, temporarily turn down the volume with
the LEVEL volume control. Readjust to your preference
when playback begins.
Maximum
12