When you select “analog 6ch – Philips DVD850AT99 User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

RETURN/
CLEAR
■ 3
■ 3
HtIUMN
o
If you press the RETURN/CLEAR button while a menu appears on the screen, you will
return to the previous menu screen.
When you select “Analog 6Ch” |
Make the follow settings for the built-in 5.1ch surround decoder.
1) Select an item by pressing the
a
/ T buttons, and press the ENTER button.
2) Make the settings (see below) by pressing the
a
/
t
/ ◄ / ► buttons, and press the
ENTER button.
C(C«nl«r] Sptekw
5{$urrM)nd] 5p«ok«r
Subwoofw
C«n(«r CftonrMi May
Surround Chonndl May ESS
TittTene
C.S.Speaker
Large; When the main speakers can reproduce low frequency signals below 120 Hz.
Size
Small; When the main speakers cannot reproduce low frequency signals below 120 Hz.
C(Center)
Speaker
On
Off
When you connect center speakers.
When center speakers are not connected.
A / T
S(Surround)
Speaker
On
Off
When you connect surround speakers.
When surround speakers are not connected.
Subwoofer
On
Off
When you connect a sub woofer.
When a sub woofer is not connected.
• Adjusting the delay time;
When enjoying 5.1 ch surround playback, it is ideal to choose a listening position that is the same distance
from each speaker. By adjusting the deiay time of the center/surround speakers, you can virtuaiiy create an
ideai iistening environment (as if the center/surround speakers were at their ideai iocations respectiveiy as
beiow.)
Center Channel 0msec; When Df equals Dc.
Delay
1 msec; When (A) is approx. 34 cm (13 inch)
2msec; When (A) is approx. 68 cm (27 inch)
3msec; When (A) is approx. 102 cm (40 inch)...
*(A) = Df-Dc
Get your optimum value ( 0 , 1 , 2 . . . 5)
dividing (A) by 34.
Surround
0msec; When Df equals Ds.
Channel Delay 1 msec; When (B) is approx. 34 cm (13 inch)
2msec; When (B) is approx. 68 cm (27 inch)
3msec; When (B) is approx. 102 cm (40 i n c h ) . . .
*(B) = D f - D s
Get your optimum value ( 0 , 1 , 2 . . . 15)
dividing (B) by 34.
◄ /►
All speakers should be located within a
circle with a radius of Df.
3) Select ‘Test Tone” and press the ENTER button.
The DVD video player outputs a test signal to each speaker.
Press the ◄ / ► buttons to switch the receiving speakers, and adjust the channel
balance on the amplifier so that each signal is heard at its appropricate volume
level.
(Continued)
39