Philips DVD850AT99 - Manual (Page 17)

TITLE-
4-
SETUP
L A
p Q
co-L.
O
1
•MENU
■ ENTER
■ B/EJECT
• JOG/PAUSE
To obtain a higher quaiity picture
Occasionally, some picture noise may appear on the TV screen whiie
playing a DVD video disc because the high resolution pictures on
these discs include a lot of information. Whiie the amount of noise
depends on the TV you use with this DVD video player, you should
generally reduce the sharpness adjustment on your TV when viewing
DVD video discs.
About ^
The ^ ^ ¿£S? icons on the heading bar show the playabie discs
for the function described under that heading.
: You can use this function with DVD video discs.
: You can use this function with VIDEO CDs.
¿22^ : You can use this function with audio CDs.
DVD:; VCD:) .CD~:
To start playback from the menu screen_________
1 Press A / T / - ^ / ^ o r t h e number buttons to select
the title you want.
Example
®g®
2 Press ENTER.
trjItH
O
To stop playback
CJCL/I
CX>
Press B/EJECT.
To remove the disc
eject Hold down B /EJECT (for longer than one
CjLv second) until the disc tray opens.
The DVD video piayer begins playback
from the selected title.
• When not using the menu screen of a
PBC-featured VIDEO CD, set “PBC” to
“Off via the on-screen dispiays.
To pause playback (still playback)
Remove the disc after the disc tray
opens compietely.
Press JOG/PAUSE during playback.
To resume normal playback, press the PLAY
(►) button.
• The sound is muted during still playback.
Be sure to hold down the B /EJECT button for
longer than one second to close the disc tray
after you remove the disc.
^Note^
' Do not move the DVD video player during playback. Doing so may damage the disc.
' Use the B /EJECT button on the remote control or DVD video player to open and close the disc tray. Do not push the disc tray whiie it is moving. Doing
so may cause the DVD video player to malfunction.
' Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the DVD video player to malfunction.
' In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen menu may damage your television set,
permanently etching that image onto its screen. To avoid this, be sure to press the B /EJECT button on your remote control once the movie is completed.
’ If you pause a picture and leave It still for a long while, the screen saver of the DVD video player automatically appears (when “Screen Savef is set to
"On" |4^). To turn off the screen saver, press the PLAY button.
About This Owner’s Manual
This owner’s manual explains the basic instructions of this DVD video player. Some DVD video discs are produced in a manner
that allows specific or limited operation during playback. As such, the DVD video player may not respond to all operating
commands. This is not a defect in the DVD video player. Refer to the instruction notes of discs.
“ 0” may appear on the TV screen during operation. A “ 0” means that the operation is not permitted by the DVD video
player or the disc.
17