Perfect Aire PNC18000 - Manual (Page 13)

12
Assemble Window Filler Panels
6
Window Sash Seal
Safety Lock
3 4
LongHex-head
Screws
(or1/2 )
7
1.Trim sash seal to fit window width. Insert
into space between upper and lower sashes.
1. Lift air conditioner and carefully slide into
cabinet leaving 6 inches protruding.
2. DO NOT push on controls or finned coils.
3. Be sure chassis is firmly seated towards
rear of cabinet.
4. Installation of front is the reverse of removal
outlined in Section 1.
Fig. 15
Fig. 16
Fig. 17
8
Extend Window Filler Panels
Install Window Lock and Sash Seal
Install Chassis into Cabinet
and Install Front to Unit
Locking Screw
7/16" Locking
Screw
and Washer