Perfect Aire PNC18000 - Manual (Page 14)

13
2
3-3/8"
(8.6cm)
X
Y
Inside
Frame
Height
Inside
Frame
Width
Up to
8-1/2"
Level
Nail Spacers To Studs
The air conditioner has a slide-out chassis so that it can
be installed through an outside wall as specified below:
Max. Wall Thickness: 12" or 10"
never be blocked.
frame construction at ends of windows, under truss-
bearing points, etc.
can be installed.
stud nearest the center of area where air conditioner
thickness of framing material used.
thickness of framing material used.
Caulk as
Required
Aluminum Flashing
Over Bottom Of Frame
Over
8-1/2"
Min
NOTE:
If wall thickness is
8-1/2" or more, add
aluminum flashing
over bottom of frame
opening to assure no
water can enter area
between inner and
outer wall.
Fig. 4
Fig. 1
Fig. 2
Fig. 3